Sika Armatec 110 EpoCem - Bonding Agent and Reinforcement Protection
Sika Armatec 110 Product Data Sheet
Application Instructions
Description
Sika Armatec 110 EpoCem is a 3-component, solvent-free, moisture-tolerant, epoxy-modified, cementitious product specifically formulated as a bonding agent and anti-corrosion coating.
Where to Use
As an anti-corrosion coating for reinforcing steel in concrete restoration.
As added protection to reinforcing steel in areas of thin concrete cover.
As a bonding agent for repairs to concrete and steel.
As a bonding agent for placing fresh, plastic concrete to existing hardened concrete.
Advantages
Excellent adhesion to concrete and steel.
Acts as an effective barrier against penetration of water and chlorides.
Long open time - up to 16 hours.
Not a vapor barrier.
Can be used exterior on-grade.
Contains corrosion inhibitors.
Excellent bonding bridge for cement or epoxy based repair mortars.
High strength, unaffected by moisture when cured.
Spray, brush or roller application.
Non-flammable, solvent free.
Coverage
Bonding agent: minimum (theoretical) on smooth, even substrate 80 ft.2/gal. (=20 mils thickness). Coverage will vary depending on substrate profile and porosity.
Reinforcement Protection: 40 ft.2/gal. (=20 mils thickness) (2 coat application).
WARNING
This product can expose you to chemicals including Quartz (SiO2), which are known to the State of California to cause Cancer & Reproductive Harm.
